Buenas noches tengo quiero me guien a poner andar mi speedr sin problemas en un equipo mikrotik haciendo balanceo, el equipo que tenia haciendo balanceo de carga se me daño y deje sola la rb450G para balanceo y administración al activar el redireccionamiento dst-nat empieza andar speedr, pero en cierro momento se torna algo lento ya que me da conflicto con las reglas del balanceo de carga, abra alguna forma de poder hacer en el mismo equipo donde se balancea?

espero su pronta ayuda

aca las reglas

/ip firewall nat add action=passthrough chain=unused-hs-chain comment=\ "place hotspot rules here" disabled=yes to-addresses=0.0.0.0 add action=masquerade chain=srcnat disabled=no out-interface=ether1 add action=masquerade chain=srcnat disabled=no out-interface=ether2 add action=masquerade chain=srcnat disabled=no out-interface=ether3 add action=redirect chain=dstnat disabled=yes dst-port=53 in-interface=red \ protocol=udp to-ports=53 add action=dst-nat chain=dstnat comment="Masquerade speedr" disabled=yes \ dst-port=80 in-interface=red protocol=tcp src-address=!192.168.44.2 \ to-addresses=192.168.44.2 to-ports=3128

/ip firewall mangle add action=accept chain=prerouting disabled=no dst-address=200.8.22.0/23 in-interface=\ red add action=accept chain=prerouting disabled=yes dst-address=200.8.22.0/23 in-interface=\ red add action=mark-routing chain=output connection-mark=ether1_conn disabled=no \ new-routing-mark=to_ether1 passthrough=yes add action=mark-routing chain=output connection-mark=ether2_conn disabled=no \ new-routing-mark=to_ether2 passthrough=yes add action=mark-routing chain=output connection-mark=ether3_conn disabled=no \ new-routing-mark=to_ether3 passthrough=yes add action=mark-connection chain=prerouting disabled=no in-interface=ether1 \ new-connection-mark=ether1_conn passthrough=yes add action=mark-connection chain=prerouting disabled=no in-interface=ether2 \ new-connection-mark=ether2_conn passthrough=yes add action=mark-connection chain=prerouting disabled=no in-interface=ether3 \ new-connection-mark=ether3_conn passthrough=yes add action=mark-connection chain=prerouting disabled=no dst-address-type=!local \ hotspot=auth in-interface=red new-connection-mark=ether1_conn passthrough=yes \ per-connection-classifier=both-addresses:3/0 add action=mark-connection chain=prerouting disabled=no dst-address-type=!local \ hotspot=auth in-interface=red new-connection-mark=ether2_conn passthrough=yes \ per-connection-classifier=both-addresses:3/1 add action=mark-connection chain=prerouting disabled=no dst-address-type=!local \ hotspot=auth in-interface=red new-connection-mark=ether3_conn passthrough=yes \ per-connection-classifier=both-addresses:3/1 add action=mark-routing chain=prerouting connection-mark=ether1_conn disabled=no \ in-interface=red new-routing-mark=to_ether1 passthrough=yes add action=mark-routing chain=prerouting connection-mark=ether2_conn disabled=no \ in-interface=red new-routing-mark=to_ether2 passthrough=yes add action=mark-routing chain=prerouting connection-mark=ether3_conn disabled=no \ in-interface=red new-routing-mark=to_ether3 passthrough=yes add action=mark-connection chain=prerouting comment=\ "if addrlist = speedr-redirect -> mark connection [connmarkspeedr-redirect]" \ disabled=yes dst-address-list=!intranet dst-port=80 in-interface=red \ new-connection-mark=connmarkspeedr-redirect passthrough=no protocol=tcp \ src-address-list=speedr-redirect add action=mark-packet chain=postrouting comment="dscp->10 => [packetspeedrHIT-LAN]" \ disabled=yes new-packet-mark=packetspeedrHIT-LAN out-interface=red passthrough=yes add action=mark-packet chain=postrouting comment="dscp->12) => [packetspeedrHIT-LAN]" \ disabled=yes dscp=12 new-packet-mark=packetspeedrHIT-LAN out-interface=red \ passthrough=yes add action=mark-packet chain=postrouting comment="dscp->48 => [packetspeedrHIT-LAN]" \ disabled=yes dscp=48 new-packet-mark=packetspeedrHIT-LAN out-interface=red \ passthrough=yes add action=mark-packet chain=postrouting comment="dscp->56 => [packetspeedrHIT-LAN]" \ disabled=yes dscp=56 new-packet-mark=packetspeedrHIT-LAN out-interface=red \ passthrough=yes