liberar cache full en mikrotik v6.. con pppoe?

Mostrando 1 a 10 de 13 registros

2013-10-16 09:21:58
rodrigo guarneri

Reply Post

Alguien del foro esta implementando cache full com mikrotik v6.4 y pppoe? .....no puedo liberar cache en los abonados con pppoe ...pero si en los abonados de hotspot ....alguien tiene alguna idea de como hacerlo

Alguém no fórum está a implementar o cache full com mikrotik v6.4 e pppoe? Eu não posso liberar ..... assinantes pppoe cache com ... mas se assinantes hotspot .... alguém tem alguma idéia de como fazer

2013-10-17 10:16:39
Edmilson Brites
Staff
License Level: 1

Bom dia Sr.: Rodrigo,

Na versão 6 do Mikrotik a chain da marcação de pacotes deve ser alterada para postrouting e controlar os pacotes pela Queue Simple e não pela Queue Tree como efetuado na versão 5.

2013-10-17 11:19:25
rodrigo guarneri

License Level: 6

o sea que las reglas deben ser de esta forma

oct/17/2013 08:35:27 by RouterOS 6.4

/queue type
add kind=pcq name=speedr_FULL pcq-classifier=dst-address

####################libera cache full############################### xx

/queue simple
add name=SPEEDR packet-marks=packetspeedrHIT queue=speedr_FULL/speedr_FULL \\
target=0.0.0.0/0

###################limita a 5m cache full############################## xx

/queue tree
add comment=\\"#####speedr FULL#####\\" name=speedr321 packet-mark=\\
packetspeedrHIT parent=global queue=speedr321

###################router speedr#################################### xx

/ip route
add check-gateway=ping comment=SpeedRMangle distance=1 gateway=192.168.10.250 \\
routing-mark=speedr
add distance=1 gateway=186.0.xxx.x

#################marcado de paquetes##################################### xx

/ip firewall mangle
add action=jump chain=prerouting comment=\\"PG CORTE\\" jump-target=hotspot

add action=mark-routing chain=prerouting dst-address-list=!SITES_SEM_CACHE \\
dst-port=80 in-interface=!ether11-SPEEDR new-routing-mark=speedr \\
protocol=tcp src-address-list=usuarios_speedr

add action=mark-connection chain=prerouting dst-port=80 in-interface=\\
ether11-speedr new-connection-mark=speedr_out protocol=tcp

add action=mark-routing chain=prerouting connection-mark=speedr_out \\
in-interface=!ether11-speedr new-routing-mark=speedr protocol=tcp \\
src-port=80

add action=mark-packet chain=postrouting comment=\\
\\"dscp->12) => [packetspeedrHIT]\\" dscp=12 new-packet-mark=packetspeedrHIT \\
passthrough=no

add action=mark-packet chain=postrouting comment=\\
\\"dscp->10 => [packetspeedrHIT]\\" dscp=10 new-packet-mark=packetspeedrHIT \\
passthrough=no

add action=mark-packet chain=postrouting comment=\\
\\"dscp->48 => [packetspeedrHIT]\\" dscp=48 new-packet-mark=packetspeedrHIT \\
passthrough=no

2013-10-17 19:15:30
rodrigo guarneri

License Level: 6

muito obrigado ... Edmilson Brites .... funcionou perfeito

2014-12-11 21:16:57
javier alberto
Client

Hola. y cuales son tus reglas para hacerlo con hotspot??? las puedes compartir??

saludos

2016-10-10 17:23:16
Jordan Amaro
Client

Estve probando diferentes reglas / y ahora probe estas que estan aqui.. no funciona..
/ip firewall mangle
add action=jump chain=prerouting comment=\\\"PG CORTE\\\" jump-target=hotspot

marca error